Built around the clinical workflow
- 3-in-1 disinfection: H2O2 fogging + plasma + UV (UV optional on selected models)
- Sub-3–5 µm quantum-atomised H2O2 droplets for 360° surface coverage
- Log 6 kill rate against validated bacteria, viruses, fungi and spores
- Open disinfectant system using 7% or 35% H2O2 available locally
- Three nozzles for faster coverage of corners, ceilings and concealed surfaces
- Automatic H2O2 removal and OK-TO-GO indication before room re-entry
- Real-time H2O2 concentration, temperature/humidity and PM2.5 monitoring
- 7-inch touchscreen, WiFi / Bluetooth / LoRa and remote tablet control
- Onboard records for more than 10,000 cycles with USB export and printable reports
- Portable, mobile and autonomous robot formats for different room workflows
The BEST-Y series is a full-room disinfection system that combines hydrogen peroxide fogging, plasma air treatment and UV surface disinfection. It is designed for hospitals and controlled environments where manual terminal cleaning cannot guarantee complete surface coverage — and where staff and equipment must be protected before the room is released.
Why hydrogen peroxide fogging
Hydrogen peroxide is a well-established sterilant with strong oxidising activity against microbial proteins, DNA and cell membranes. The BEST-Y system atomises H2O2 into sub-3–5 µm droplets that travel through the room, penetrate cracks and crevices, and contact floors, walls, ceilings and equipment surfaces that are difficult to reach by manual wiping.
- Validated Log 6 kill rate against bacteria, viruses, fungi and spores
- 3-nozzle design for faster, more even coverage of complex rooms
- Compatible with papers, desks, plastics and electronic devices when used as directed
- Automatic H2O2 removal after the cycle; OK-TO-GO indication before re-entry
- Open system accepts locally available 7% or 35% H2O2, reducing running cost
Three formats for different workflows
| Model | Format | Coverage | Key workflow |
|---|---|---|---|
| BEST-Y-A1 | Portable | ≤50 m² | Small rooms, clinics, consultation and treatment rooms; one-key start |
| BEST-Y-B1 | Mobile | ≤170 m² | Operating rooms, ICU, wards and laboratories; H2O2 + plasma with optional UV |
| BEST-Y-C2 | Autonomous robot | ≤500 m³ | Multi-room patrol, lidar mapping, automatic charging and remote scheduling |
One platform, three disinfection modes
H2O2 fogging provides full-room surface disinfection after patient discharge. Plasma provides continuous air purification when the room is occupied. UV adds a surface disinfection mode for selected applications. The modules can be switched independently, so the same device supports night-time terminal disinfection and daytime air treatment.
Monitoring, records and validation
The 7-inch touchscreen displays cycle status and H2O2 concentration in real time. More than 10,000 records can be stored on board and exported by USB for audit and traceability; optional Bluetooth, WiFi or LoRa connectivity supports remote monitoring and report printing.
- Chemical indicator: red-to-yellow colour change confirms H2O2 coverage
- 24 h biological indicators: Log 4 and Log 6, self-contained spore strips
- 1 h rapid biological indicator: Log 6, read with a compatible rapid reader
- Temperature, humidity and H2O2 concentration recorded throughout the cycle
Application areas
High-risk areas, operating rooms, ICU, neonatal wards, infectious disease wards, general wards, scientific research laboratories, PCR laboratories, laboratory animal centres, microbiology laboratories, biopharmaceutical facilities and public areas with hygiene requirements.
Specifications are based on the BEST Surface Disinfection Catalog 2024 and Air & Space Disinfection presentation. Cycle time, coverage and material compatibility depend on room volume, sealing, load and the selected H2O2 concentration; confirm the final configuration and validation protocol with FulCare.
